QINJIANPACKAGING Request a quote
🌐 English

Automotive Machined Parts Export Packaging: Corrosion and Cleanliness Protection

Automotive Machined Parts Export Packaging: Corrosion and Cleanliness Protection

A wooden crate does not by itself prevent contact damage, material transfer or contamination during opening. Separate transport outer protection from the layer that touches the parts, then agree on corrosion, cleanliness and retrieval requirements. This article covers ordinary automotive components, not dangerous goods such as traction batteries.

The image illustrates an existing packaging structure, not an industry-specific delivery case.

Design separation around vulnerable surfaces

For shafts, housings, gears and finished surfaces, do not assume loose filler provides adequate separation. Mark support locations, no-contact surfaces, plugged openings and quantities on the packing drawing. Check that opening tools cannot strike critical surfaces. Layer weight and retrieval sequence should fit warehouse and line-side operations.

Check corrosion protection against materials and later processes

Before choosing oil, vapour-phase inhibitors or barrier packaging, confirm metal type, surface treatment, residual liquids, storage duration and whether residues are acceptable. Define the required cleanliness and dryness before packing, closure method and receiving treatment. Do not specify one inhibitor for every part without compatibility assessment.

Turn cleanliness requirements into inspection and opening instructions

VDA 19.1 addresses technical cleanliness inspection; naming it does not certify a crate supplier. If customers limit particles, residues or contact materials, agree on sampling point, method and responsibility. The outer crate, inner protection and opening operation have separate roles. Check wood phytosanitary requirements independently for export shipments.

Enquiry and design checklist

  • Material, finish and no-contact areas identified
  • Permitted contact materials and residue limits agreed
  • Transport, storage and protection duration stated
  • Packing quantities, layer plan and retrieval process defined

Related packaging guidance and products

Heat-treated export crates · Plywood export cases · Automotive Parts Batch Packaging: Export Pallets or Returnable Cases?

Send dimensions, weight, centre of gravity, quantity, destination and handling conditions to Jiangsu Qinjian Packaging Materials Co., Ltd. for assessment. Structure, protection, delivery scope, testing and material compatibility require confirmation.

Discuss a packaging plan

References and scope

Request a quote →

Contact our team

Factory address

Group 12, Banjing Community, Banjing Town, Rugao, Nantong, Jiangsu, China

Open factory map ↗

+86 139 1775 0719 · zhangqin0229@163.com

Request a quote →